After years of popularity, Rolex Daytona Chronograph high quatily replica watch is well-known worldwide. The Cosmograph Daytona 116500LN replaces the model 116520, which is the stainless steel and black dial pas cher montres Rolex Daytona replique that has been used for many years.
The most obvious difference between the two luxury replica watches is the addition of a black « Cerachrom » bezel. This new type of improved fixed baffle has high scratch resistance, excellent corrosion resistance and impermeability to UV fading effect. Compared with the previous polished stainless steel bezel, the current black bezel gives the impression that it is a larger dial.
The best replica watch has a 40 mm x 12.4 mm thick oyster shell made of 904L corrosion-resistant high-temperature alloy steel. The Oyster case is the world’s first waterproof case and is one of the symbols of Rolex replica watches. Using the « Triplock » locking system, Daytona’s case can be water-resistant like a submarine hatch, with a minimum waterproof level of 100m / 300ft.
The top replica watch from the polished steel hour markers with bright filling to the proportions, everything remains the same. The easy-to-read Chromalight display uses a long-lasting luminescent material that glows in a bright blue hue in the dark. The word DAYTONA is printed in red and covers the top of the small second hand at 6 o’clock.
Aesthetically, the silver-rimmed sub-register on the dial remains unchanged from the previous model. The bottom central sub-dial at 6 o’clock is the smaller running seconds sub-dial. The chronograph cheap replica watch uses the sub-registers at 3 and 9 o’clock to the left and right of this sub-dial.
The permanent movement of the large central seconds hand of the chronograph best replica watch sweeps the dial very smoothly. The small dial on the right side of the dial at 3 o’clock is a 30-minute counter, and at 9 o’clock, opposite the dial is a 12-hour counter. These three hands are operated smoothly via the chronograph buttons, which are located above and below the winding crown on the right side of the case.
Rolex replica watch‘s Oyster bracelet is made of a three-piece oystersteel steel chain. The two outer links have a brushed surface, while the middle link has a polished finish. The links at both ends of the bracelet are connected to the polished lugs on the case, so when you look at the case, the finish will transition from polished to brushed, and then to the polished finish of the center link.